Urban Street Design
Designer products for urban street design for malls, housing or public areas. Seating systems, litter bins, cycle racks, planters, bollards, fountains, tree surrounds, information points etc.
Showing 46–60 of 73 resultsSorted by latest
-
Iona Planter
Iona Planter
Iona Planter is a circular flower-box made of Cor-ten steel plate. Available in both concave and convex versions. The top opening is figure eight-shaped. The strip joining the two sections is made of AISI 304 stainless steel.
Designed by: TOBIA REPOSSI
-
Dedalo – Simple Bicycle Rack
Dedalo – Simple Bicycle Rack
A simple, push-in bicycle rack made of Ø 40mm AISI 304 tubular stainless steel shaped into the Modo® parabolic curve.
Designed by: TOBIA REPOSSI
Model No.: M06DE304
-
Maia Bicycle racks
Maia Bicycle racks
An S235JR steel bicycle rack made of shaped 40x10mm plates arranged in a radial pattern. These are welded to a base ring which anchors the structure to the ground and joined at the top by a 12mm rod for support and alignment.
Designed by: LUIGI FERRARIO
-
Cleia – Original Bus Shelters
Cleia – Original Bus Shelters
The roof of this original bus shelter is mounted off-centre. The structure is made of S235JR steel, 35x35mm angular profiles, a methacrylate roof and shatterproof crystal walls. An optional ischiatic seating system can be installed; other seating solutions are available on request.
Designed by: LUIGI FERRARIO
Model No.: M09CL360
-
Era – Bus Shelters
Era – Bus Shelters
Era is a bus shelter made up of three S235JR steel columns. The base of the columns is truncated cone-shaped. 50x50mm. triangular section profiles form the back of the shelter and curve forwards to create the roof. The covering for the back and roof is made of methacrylate.
Designed by: ALFONSO MALIGNO
Model No.: M09ER360
-
Venere Litter Bin
Venere Litter Bin
Venere is the 5mm thick, Cor-ten steel supporting structure of this litter bin is shaped in such a way as to form both the base and the cover. The removable S235JR steel plate container is fitted with a liner ring in the litter bin.
Designed by: PAOLA BASSO
Model No.: M04VE330_360
-
Decà Lounge
Decà Lounge
Decà is a relaxing chaise lounge designed for urban parks and gardens. The S235JR structure consists of 6 Ø 30mm tubular elements for the backrest, intermeshed with 7 similar elements for the elegant seat.
Designed by: TOBIA REPOSSI
Model No.: M03DE360
-
Evian – Bench
Evian – Bench
Evian is a bench manufactured from S235JR steel, consisting of laser-cut supports, 7 40x40mm. tubular elements for the seat, and 5 40×10 tubular elements for the backrest. This bench is also available with concrete stands.
Designed by: MODO DESIGNTEAM
-
Dorado – Simple Plant Protector
Dorado – Simple Plant Protector
Dorado is a simple and elegant S235JR steel plant protector made up of a single, circular ring.
Designed by: LUIGI FERRARIO
Model No.: M13DO360
-
Talitha – Elegant Plant/Tree Protectors
Talitha – Elegant Plant/Tree Protectors
Talitha is an elegant, Cor-ten steel plate plant/tree protector with supporting frame. This plant/tree protector has a water-jet system is used to cut an original “bird’s footprint” pattern into the covering sheet.
Designed By: ANNA MORANDI E PAOLO CITTERIO
Model No.: M13TH330
-
Lilla – Urban Fountain
Lilla – Urban Fountain
Lilla is an AISI 304 stainless steel urban fountain with a sinuous, tubular structure and base plate with laser-cut grooves for water drainage. This urban fountain has a push-button tap with a timer at the top of the tube means that it is possible to drink both at the top and the bottom of the fountain. The bowl at the base fills with water and serves as a drinking trough for animals.
Designed by: TOBIA REPOSSI
Model No.: M14LI304
-
Egea – Urban Fountain
Egea – Urban Fountain
Egea is a simply shaped urban fountain consisting of an S235JR steel Ø190mm tube with front panel, button and tap made of AISI 304 stainless steel. The base plate of this urban fountain is trapezoidal, though a semi-circular or circular plate is available for the version with a double tap.
-
Limes – Classic Style Barrier
Limes – Classic Style Barrier
A modern reworking of the classic-style barrier made of S235JR steel. The basic unit of this modular system consists of two, square-section columns, topped with ornamental spheres. The central panel is made of intersecting tubes with circular plaques at the centre on both sides.
Designed by: MODO DESIGNTEAM
-
Anchise – Barrier
Anchise – Barrier
A barrier made of Ø 60mm., AISI 304 curved stainless steel tube. Covered with a stainless steel sheet. This can be personalized with logos or patterns cut using a water jet.
Designed by: ITALO ROTA E ALESSANDRO PEDRETTI
-
Hospitalet – Bollard
Hospitalet – Bollard
A cylindrical, S235JR steel bollard with an AISI 304 stainless steel decorative ring.
Versions of Hospitalet:
-
To be anchored (M11HO360)
-
Removable version (M11HO360_E)
-