Bicycle Racks
Showing all 7 results
-
Optical Bike – Stainless Steel Bicycle Rack
Optical Bike – Stainless Steel Bicycle Rack
Optical Bike is an AISI 304 stainless steel bicycle rack consists of 5, Ø 40mm tubular elements, each one part of a bicycle: two wheels, a frame, handlebars and a saddle. These are aligned so that, seen from either side, they magically create the classic, bicycle symbol.
Designed by: MASSIMO GIUNTOLI
Model No.: M06OP304
-
Wheelpower Bicycle Rack
Wheelpower Bicycle Rack
Wheelpower is a bicycle rack in the shape of two wheels set side by side on the same axis. There is room for one or two bikes, depending on how Wheelpower is installed. Made of two, Ø 600mm AISI 304 stainless steel wheel-shaped supports with Ø 40mm rims and spoke rods. The two supports are set 80mm apart.
Designed by: MASSIMO GIUNTOLI
-
On Air – Bicycle Racks
On Air – Bicycle Racks
On Air – bicycle racks is a handy place to lean your bike or pump up your tyres. This bicycle rack is made up of Ø 40mm. AISI 304 stainless steel tube shaped into a Ø 600mm. ring with a robust pump inside.
Designed by: MASSIMO GIUNTOLI
Model No.: M06ON304
-
Dedalo – Simple Bicycle Rack
Dedalo – Simple Bicycle Rack
A simple, push-in bicycle rack made of Ø 40mm AISI 304 tubular stainless steel shaped into the Modo® parabolic curve.
Designed by: TOBIA REPOSSI
Model No.: M06DE304
-
Maia Bicycle racks
Maia Bicycle racks
An S235JR steel bicycle rack made of shaped 40x10mm plates arranged in a radial pattern. These are welded to a base ring which anchors the structure to the ground and joined at the top by a 12mm rod for support and alignment.
Designed by: LUIGI FERRARIO
-
Enea – Bicycle Rack
Enea – Bicycle Rack
A bicycle rack made of a number of shaped 40x10mm profiles. These are set side by side and joined at the base to a horizontal plate equipped with brackets for anchoring to the ground. The profiles are also joined at the top by a 12mm rod for support and alignment.
Designed by: LUIGI FERRARIO
Model No.: M06EN360
-
Arcas – Bicycle Rack
Arcas – Bicycle Rack
A bicycle rack whose basic shape is made by reproducing 900mm spiral curves from a 50x10mm plate. The base is made of curved plate with the ends shaped so that a number of modules can be connected together. Arcas is made of S235JR steel, but is also available in AISI 304 stainless steel.
Designed by: TOBIA REPOSSI