Mirra – Steel Barrier
The external frame of this S235JR steel barrier is made of vertical and horizontal angular section profiles. The internal design consists of two strips: one set diagonally and the other v-shaped. There are two horizontal rods at the bottom.
Designed by: LUIGI FERRARIO
Model No.: M12MI360
Related products
-
Rotating Pyramid Rope Structure
Rotating Pyramid Rope Structure
Pyramid rope structure by Holzhof has galvanised tubular steel for load bearing of 12cm diameter with a cap. It also has conical shaped rotating climber with self lubricating bearings, polypropylene covered 16mm twisted steel rope climbing net and a Tubular base ring of stainless steel.
Comes with a kit of galvanised bolts and plastic plugs.
Model No.- Roto300
-
Holzhof Single Seater Swing Sultan XSAL31
-
Holzhof Classic Tothouse
Holzhof Classic Tothouse
This classic playhouse by Holzhof is made up of glue laminated timber with two layers of struts (cross section 9*9cm)
It has bevelled solid wooden floor board i.e. 33mm thick, three layer plywood walls i.e.19mm thick, two non-slip plywood seats/table i.e 21mm thick, one non-slip plywood shelf i.e. 21mm thick and rotationally moulded two pitched roof made up of polyethylene. Comes with a kit consisting of galvanised bolts for assembly and plastic plugs
Playing equipment manufactured according to EN 1176 and 1177 : 2018 regulations.
-
Holzhof Climbing Net/Rungs
Holzhof Climbing Net/Rungs
Holzhof climbing net is made up of glue laminated timber with two layers of wooden struts (i.e. 9*9cm).
It has 16mm twisted steel rope nets for climbing that is covered in polypropylene. The columnn fixing has been done with plastic thimble. Along with plastic ball joints of 50mm, ladder with wooden rungs of 40mm and comes with a kit that contains galvanised bolts for assembly and plastic plugs.
Model No.- XCAR21
Related Products
-
Anchise – Barrier
Anchise – Barrier
A barrier made of Ø 60mm., AISI 304 curved stainless steel tube. Covered with a stainless steel sheet. This can be personalized with logos or patterns cut using a water jet.
Designed by: ITALO ROTA E ALESSANDRO PEDRETTI
-
Limes – Classic Style Barrier
Limes – Classic Style Barrier
A modern reworking of the classic-style barrier made of S235JR steel. The basic unit of this modular system consists of two, square-section columns, topped with ornamental spheres. The central panel is made of intersecting tubes with circular plaques at the centre on both sides.
Designed by: MODO DESIGNTEAM
-
Isola ecologica – Modular Barriers
Isola ecologica – Modular Barriers
Isola ecologica is a modular system designed to demarcate and conceal urban, recycling areas. The system consists of a series of perforated panels in S235JR steel sheet. The structure is supported by lateral tubes.
Designed by: MODO DESIGNTEAM