Dedalo – Simple Bicycle Rack
A simple, push-in bicycle rack made of Ø 40mm AISI 304 tubular stainless steel shaped into the Modo® parabolic curve.
Designed by: TOBIA REPOSSI
Model No.: M06DE304
Related products
-
Rotating Pyramid Rope Structure
Rotating Pyramid Rope Structure
Pyramid rope structure by Holzhof has galvanised tubular steel for load bearing of 12cm diameter with a cap. It also has conical shaped rotating climber with self lubricating bearings, polypropylene covered 16mm twisted steel rope climbing net and a Tubular base ring of stainless steel.
Comes with a kit of galvanised bolts and plastic plugs.
Model No.- Roto300
-
Casablanca Aluminium Tot House with Slide
Casablanca Aluminium Tot House with Slide
The playhouse with a slide by Holzhof comes with aluminium struts of 9*9cm which is made up of aluminium alloy. 15mm thick two pitched roof, seats and platforms made up of high pressure laminates. Also, has rotationally moulded slide (height 84cm) and ramp (height 84cm) made up of polyethylene. It comes along with a kit that consists of galvanised bolts for assembly and plastic plugs
Playing equipment manufactured according to EN 1176 and 1177 : 2018 regulations.
-
Four Seater Rocking Seesaw
Four Seater Rocking Seesaw
Holzhof double seater seesaw made up of glue laminated horizontal timber i.e. 9.8×14.2 cm.
It has four tubular stainless steel hand grips, four polyethylene seats, glue laminated load-bearing timbers i.e.8.6×14 cm and self lubricating bearings. The seats are anti-shock protectant.
Playing equipment manufactured according to EN 1176 and 1177 : 2018 regulations.
Model No.- XCD40
-
Hexagonal Gym
Hexagonal Gym
The Holzhof Balancing and Climbing Hexagonal Gym is made up of glue laminated timber with two layers of struts (i.e. 9*9cm + ground bracket).
The vertical wall bar has 40mm wooden rungs. The climbing rope is covered in polypropylene with 16mm twisted steel rope. Column fixing has been done with plastic thimble. Along with plastic ball joints of 50mm and steel tubular pole of 40mm.
Model No.: XCPE10
Related Products
-
Arcas – Bicycle Rack
Arcas – Bicycle Rack
A bicycle rack whose basic shape is made by reproducing 900mm spiral curves from a 50x10mm plate. The base is made of curved plate with the ends shaped so that a number of modules can be connected together. Arcas is made of S235JR steel, but is also available in AISI 304 stainless steel.
Designed by: TOBIA REPOSSI
-
Enea – Bicycle Rack
Enea – Bicycle Rack
A bicycle rack made of a number of shaped 40x10mm profiles. These are set side by side and joined at the base to a horizontal plate equipped with brackets for anchoring to the ground. The profiles are also joined at the top by a 12mm rod for support and alignment.
Designed by: LUIGI FERRARIO
Model No.: M06EN360
-
Optical Bike – Stainless Steel Bicycle Rack
Optical Bike – Stainless Steel Bicycle Rack
Optical Bike is an AISI 304 stainless steel bicycle rack consists of 5, Ø 40mm tubular elements, each one part of a bicycle: two wheels, a frame, handlebars and a saddle. These are aligned so that, seen from either side, they magically create the classic, bicycle symbol.
Designed by: MASSIMO GIUNTOLI
Model No.: M06OP304