Onebar – Stainless Steel Fountain
Onebar fountain is a distinctive, AISI 304 stainless steel fountain dedicated to the urban cyclist. Pressing the handle of the pump-shaped rod once, starts a timed flow of drinking water.
Designed by: MASSIMO GIUNTOLI
Model No.: M14OB304
Related products
-
Holzhof Multi Tothouse
Holzhof Multi Tothouse
The Holzhof multi-playhouse is made up of glue laminated timber with two layers of struts (i.e.9*9cm).
It has solid wooden floor plank which is 33mm thick, four pitched roof which is 20mm thick with slate mineral sheathing, high pressure laminated seats/tables of 15mm thick, a revolving plastic handwheel and rotationally moulded parapet of polyethylene. Comes with a Kit consisting of galvanised bolts for assembly and plastic plug.
Playing equipment manufactured according to EN 1176 and 1177 : 2018 regulations.
-
Holzhof Spiral Tower Fun Oasis
Holzhof Spiral Tower Fun Oasis
Holzhof spiral tower slide made up of glue laminated timber with two-layer struts. It has a hexagonal waterproof roof, non slip triangular platforms, polycarbonate porthole and shaped polyethylene entrance two layeredpanel. One piece polyethylene rotationally moulded slides.
100% recyclable polyethylene
Playing equipment manufactured according to EN 1176 and 1177 : 2018 regulations.
Model No. XOA100LT
-
Rotating Pyramid Rope Structure
Rotating Pyramid Rope Structure
Pyramid rope structure by Holzhof has galvanised tubular steel for load bearing of 12cm diameter with a cap. It also has conical shaped rotating climber with self lubricating bearings, polypropylene covered 16mm twisted steel rope climbing net and a Tubular base ring of stainless steel.
Comes with a kit of galvanised bolts and plastic plugs.
Model No.- Roto300
-
Holzhof Classic Tothouse
Holzhof Classic Tothouse
This classic playhouse by Holzhof is made up of glue laminated timber with two layers of struts (cross section 9*9cm)
It has bevelled solid wooden floor board i.e. 33mm thick, three layer plywood walls i.e.19mm thick, two non-slip plywood seats/table i.e 21mm thick, one non-slip plywood shelf i.e. 21mm thick and rotationally moulded two pitched roof made up of polyethylene. Comes with a kit consisting of galvanised bolts for assembly and plastic plugs
Playing equipment manufactured according to EN 1176 and 1177 : 2018 regulations.
Related Products
-
Lilla – Urban Fountain
Lilla – Urban Fountain
Lilla is an AISI 304 stainless steel urban fountain with a sinuous, tubular structure and base plate with laser-cut grooves for water drainage. This urban fountain has a push-button tap with a timer at the top of the tube means that it is possible to drink both at the top and the bottom of the fountain. The bowl at the base fills with water and serves as a drinking trough for animals.
Designed by: TOBIA REPOSSI
Model No.: M14LI304
-
Bridget – Double Fountain
Bridget – Double Fountain
Bridget is a double fountain made up of a bridge-shaped, AISI 304 stainless steel tubular system with a square section. By pressing one of the two buttons at the ends of the horizontal bar, water flows from the top or the bottom of the structure as needed. The grill at the base is made of AISI 304 stainless steel.
Designed by: MASSIMO GIUNTOLI
Model No.: M14BR304
-
Giraque – Steel Fountain
Giraque – Steel Fountain
Giraque giraffe-shaped steel fountain, S235JR steel fountain is especially popular with children. By pressing the giraffe’s curved tongue, you get water. Moving the head up or down changes the direction of the jet, so you can either drink directly from it or fill a bottle. The grill at the base is made of AISI 304 stainless steel.
Designed by: MASSIMO GIUNTOLI
Model No.: M14GI360