On Air – Bicycle Racks
On Air – bicycle racks is a handy place to lean your bike or pump up your tyres. This bicycle rack is made up of Ø 40mm. AISI 304 stainless steel tube shaped into a Ø 600mm. ring with a robust pump inside.
Designed by: MASSIMO GIUNTOLI
Model No.: M06ON304
Related products
-
Rotating Pyramid Rope Structure
Rotating Pyramid Rope Structure
Pyramid rope structure by Holzhof has galvanised tubular steel for load bearing of 12cm diameter with a cap. It also has conical shaped rotating climber with self lubricating bearings, polypropylene covered 16mm twisted steel rope climbing net and a Tubular base ring of stainless steel.
Comes with a kit of galvanised bolts and plastic plugs.
Model No.- Roto300
-
Polyethylene Roundabout
Polyethylene Roundabout
Holzhof roundabouts comes with a stainless steel tubular frame with a single rotationally mould body made up of polyethylene.
It has high pressure laminated wheel of 15mm thick with a self lubricating mechanism
Playing equipment manufactured according to EN 1176 and 1177 : 2018 regulations.
Model No.- XCG120
-
Holzhof Climbing Net/Rungs
Holzhof Climbing Net/Rungs
Holzhof climbing net is made up of glue laminated timber with two layers of wooden struts (i.e. 9*9cm).
It has 16mm twisted steel rope nets for climbing that is covered in polypropylene. The columnn fixing has been done with plastic thimble. Along with plastic ball joints of 50mm, ladder with wooden rungs of 40mm and comes with a kit that contains galvanised bolts for assembly and plastic plugs.
Model No.- XCAR21
-
Hexagonal Gym
Hexagonal Gym
The Holzhof Balancing and Climbing Hexagonal Gym is made up of glue laminated timber with two layers of struts (i.e. 9*9cm + ground bracket).
The vertical wall bar has 40mm wooden rungs. The climbing rope is covered in polypropylene with 16mm twisted steel rope. Column fixing has been done with plastic thimble. Along with plastic ball joints of 50mm and steel tubular pole of 40mm.
Model No.: XCPE10
Related Products
-
Maia Bicycle racks
Maia Bicycle racks
An S235JR steel bicycle rack made of shaped 40x10mm plates arranged in a radial pattern. These are welded to a base ring which anchors the structure to the ground and joined at the top by a 12mm rod for support and alignment.
Designed by: LUIGI FERRARIO
-
Dedalo – Simple Bicycle Rack
Dedalo – Simple Bicycle Rack
A simple, push-in bicycle rack made of Ø 40mm AISI 304 tubular stainless steel shaped into the Modo® parabolic curve.
Designed by: TOBIA REPOSSI
Model No.: M06DE304
-
Wheelpower Bicycle Rack
Wheelpower Bicycle Rack
Wheelpower is a bicycle rack in the shape of two wheels set side by side on the same axis. There is room for one or two bikes, depending on how Wheelpower is installed. Made of two, Ø 600mm AISI 304 stainless steel wheel-shaped supports with Ø 40mm rims and spoke rods. The two supports are set 80mm apart.
Designed by: MASSIMO GIUNTOLI