Wheelpower Bicycle Rack
Wheelpower is a bicycle rack in the shape of two wheels set side by side on the same axis. There is room for one or two bikes, depending on how Wheelpower is installed. Made of two, Ø 600mm AISI 304 stainless steel wheel-shaped supports with Ø 40mm rims and spoke rods. The two supports are set 80mm apart.
Designed by: MASSIMO GIUNTOLI
Related products
-
Hexagonal Gym
Hexagonal Gym
The Holzhof Balancing and Climbing Hexagonal Gym is made up of glue laminated timber with two layers of struts (i.e. 9*9cm + ground bracket).
The vertical wall bar has 40mm wooden rungs. The climbing rope is covered in polypropylene with 16mm twisted steel rope. Column fixing has been done with plastic thimble. Along with plastic ball joints of 50mm and steel tubular pole of 40mm.
Model No.: XCPE10
-
Kompan Crazy Nellie Springer
Kompan Crazy Nellie Springer
Rocking on Crazy Nellie is a wildly attractive playground activity that children will return to again and again. Children are able to control the play by moving their bodies to make Crazy Nellie. They will feel delighted to have the elephant respond to their movements. The two sides support the seated position, and the foot and hand holds provide a stable point to stem feet and hands from, to create the movement. This is not only fun, but is also good for physical and cognitive development. When children begin to learn the connections between their bodies and their movements, they begin to make cognitive connections to a range of body movements and sensations. The horse theme will be attractive to the child’s imagination, and will encourage wonderful physical and imaginative play.
Model No.: M12301-01P
-
Holzhof Classic Tothouse
Holzhof Classic Tothouse
This classic playhouse by Holzhof is made up of glue laminated timber with two layers of struts (cross section 9*9cm)
It has bevelled solid wooden floor board i.e. 33mm thick, three layer plywood walls i.e.19mm thick, two non-slip plywood seats/table i.e 21mm thick, one non-slip plywood shelf i.e. 21mm thick and rotationally moulded two pitched roof made up of polyethylene. Comes with a kit consisting of galvanised bolts for assembly and plastic plugs
Playing equipment manufactured according to EN 1176 and 1177 : 2018 regulations.
-
Rotating Pyramid Rope Structure
Rotating Pyramid Rope Structure
Pyramid rope structure by Holzhof has galvanised tubular steel for load bearing of 12cm diameter with a cap. It also has conical shaped rotating climber with self lubricating bearings, polypropylene covered 16mm twisted steel rope climbing net and a Tubular base ring of stainless steel.
Comes with a kit of galvanised bolts and plastic plugs.
Model No.- Roto300
Related Products
-
Dedalo – Simple Bicycle Rack
Dedalo – Simple Bicycle Rack
A simple, push-in bicycle rack made of Ø 40mm AISI 304 tubular stainless steel shaped into the Modo® parabolic curve.
Designed by: TOBIA REPOSSI
Model No.: M06DE304
-
On Air – Bicycle Racks
On Air – Bicycle Racks
On Air – bicycle racks is a handy place to lean your bike or pump up your tyres. This bicycle rack is made up of Ø 40mm. AISI 304 stainless steel tube shaped into a Ø 600mm. ring with a robust pump inside.
Designed by: MASSIMO GIUNTOLI
Model No.: M06ON304
-
Optical Bike – Stainless Steel Bicycle Rack
Optical Bike – Stainless Steel Bicycle Rack
Optical Bike is an AISI 304 stainless steel bicycle rack consists of 5, Ø 40mm tubular elements, each one part of a bicycle: two wheels, a frame, handlebars and a saddle. These are aligned so that, seen from either side, they magically create the classic, bicycle symbol.
Designed by: MASSIMO GIUNTOLI
Model No.: M06OP304